Name: Arrow Insulaltion
Address: 38 Totmel Road, Poole, Dorset, Bh178BX, United Kingdom
Telephone: 01202 934444
Price range: ££

Customer Details
Name*
Address*
Phone
Email*
Photo of the Front of Home or Building
Type of Works
Type of Insulation to Survey*
- The survey we did today looked at the Cavities
- The survey we did today looked at the Loft Insulation
- The survey we did today looked at the Cavities & Loft Insulation
About The Building
Type of building*
- House
- Bungalow
- Flat
- Block of Flats
- Flat above Shop
- Commercial Unit
- Office Block
Style*
- Detached
- Semi Detached
- End Terrace
- Mid Terrace
- Maisonette
- Whole Block of Flats
Construction*
- Brick
- Render
- Brick and Render
- Stone
- Metal
- Timber
- Pre Fab
- System Built
Condition of Brick and pointing or render*
- The Walls are considered to be in Excellent condition in terms of adding insulation to them and keeping the bead in and water ingress out
- The Walls are considered to be in Good condition in terms of adding insulation to them and keeping the bead in and water ingress out
- The Walls are considered to be in Fair condition in terms of adding insulation to them and keeping the bead in and water ingress out
- The Walls are considered to be in Poor condition in terms of adding insulation to them and keeping the bead in and water ingress out
- The Walls are considered to be in Critical condition in terms of adding insulation to them and keeping the bead in and water ingress out
- The walls are in good condition however the insulation in place needs to be extracted due to failures
Type of Floor
- We believe that the floor is a Timber suspended floor. We note this as timber suspended floor require air vents to allow airflow under the floors to prevent them from rotting. So we check to see they are free and clear if not a solid base.
- We believe that the floor is a Solid Concrete Base. We note this as timber suspended floor require air vents to allow airflow under the floors to prevent them from rotting. They are not necessary with a solid base.
- Other
Is an extractor fan suggested for the Kitchen?*
- Yes
- No
- Unknown
Is an extractor fan suggested for bathrooms?*
- Yes
- No
- Unknown
Is there a fire place?*
- There is a fire place/log burner. We check this as if there is no core vent allowing oxygen into the room, an insulation installer will have to add one for an open fire or a log burner over 5kw.
- There is not a fire place/log burner. We check this as if there is no core vent allowing oxygen into the room, an insulation installer will have to add one for an open fire or a log burner over 5kw.
What type of fire place?*
- Open Fire Place
- Log Burner
- Gas Fire
What type of fire place?*
- Open Fire Place
- Log Burner
- Gas Fire
What KW size is the fire place?
Does fire place require a core vent ?*
- Yes
- No
- Unsure
Is the DPC present and at least 150mm above ground?*
- There is a DPC visible. We check this to ensure that rising damp is prevented and that it is at least 150mm above ground to prevent splashing water ingress. DPCs are a requirement of the insurance backed guarantees.
- There is not a DPC visible. We check this to ensure that rising damp is prevented and that it is at least 150mm above ground to prevent splashing water ingress. DPCs are a requirement of the insurance backed guarantees.
About the Cavity
Are The Cavities Empty*
- The cavities have not already been insulated and are empty
- There is insulation present in the cavity walls.
- The Solid walls are not suitable for cavity wall insulation
- The Steel framed home walls are not suitable for cavity wall insulation
- The Timber Framed home walls are not suitable for cavity wall insulation
- The System built home walls are not suitable for cavity wall insulation
What Type of Insulation's present?*
- Blown Fibre insulation has previously been installed.
- White Wool insulation has previously been installed.
- Urea-formaldehyde Foam insulation has previously been installed.
- White Bead insulation has previously been installed.
- Silver Bead insulation has previously been installed.
- PIR Insulation Board was installed at the point of build. But there is still a cavity gap large enough to take more insulation
- PIR Insulation Board was installed at the point of build. Nothing more can be done
- Cavity Batts were installed at the point of build. Nothing more can be done
Depth of Cavity*
- The depth of the cavities within the walls are 40mm which is the minimum for cavity wall insulation
- The depth of the cavities within the walls are 50mm which is suitable for cavity wall insulation
- The depth of the cavities within the walls are 60mm which is suitable for cavity wall insulation
- The depth of the cavities within the walls are 75mm which is suitable for cavity wall insulation
- The depth of the cavities within the walls are 90mm which is suitable for cavity wall insulation
- The depth of the cavities within the walls are 100mm which is suitable for cavity wall insulation
- The depth of the cavities within the walls are 125mm which is suitable for cavity wall insulation
- The depth of the cavities within the walls are 150mm which is suitable for cavity wall insulation
Is Cavity Insulation Works Suggested?*
- Our recommendation is to install EPS Bonded Bead into empty cavity
- Our recommendation is to extract the old insulation and replace with EPS Bonded Bead
- The current insulation looks fine and no need to recommend any works.
- The home is not suitable for cavity wall insulation so we are unable to offer wall insulation recommendations. External or internal options are available but not by Arrow.
Areas Requiring Insulating
Main Home or Building*
- Yes
- No
Does Gable Wall Top Section need insulating?*
- Yes
- No
Does Extension need insulating?*
- Yes
- No
Insulate Conservatory?*
- Yes
- No
Insulate Home/Garage party wall?*
- Yes
- No
Insulate Garage External Wall*
- Yes
- No
Other:
Are Cavity Barriers Required?*
- Yes
- No
Where?*
- Semi Detached Boarders
- Mid Terrance Boarders
- Extensions works
Behind Tiles/Gladding with internal fill?*
- Yes
- No
Are remedial works required
- No
- Yes
Required Remedial Works
The following remedial works if any, should be considered before cavity wall insulation is installed:
Loft Insulation
Does loft currently have laid insulation
- The loft does not have any insulation laid. We recommend laying 300mm of Knauff 44 mineral wool to bring it up to the minimum standard of 270mm.
- The loft has about 50mm laid. We recommend laying a top up 250mm of Knauff 44 mineral wool to bring it up to the minimum standard of 270mm.
- The loft has about 100mm laid. We recommend laying a top up 200mm of Knauff 44 mineral wool to bring it up to the minimum standard of 270mm.
- The loft has about 150mm laid. We recommend laying a top up 150mm of Knauff 44 mineral wool to bring it up to the minimum standard of 270mm.
- The loft has about 200mm laid. We recommend laying a top up 100mm of Knauff 44 mineral wool to bring it up to the minimum standard of 270mm.
- The loft has about 250mm laid. We recommend laying a top up 50mm of Knauff 44 mineral wool to bring it up to the minimum standard of 270mm.
- The Loft insulation is not fit for purpose and need to come out. We recommend laying 300mm of Knauff 44 mineral wool to bring it up to the minimum standard of 270mm.
- The loft insulation is suitable and of adequate depth with no need to do anything.
Is the existing ventilation within the loft space adequate and un-restricted?
- Yes
- No
Is there any evidence of high moisture readings, dampness, mould or water ingress?
- There does not appear to be any evidence of high moisture readings, dampness, mould or water ingress
- There does appear to be evidence of high moisture readings, dampness, mould or water ingress.
- There does appear to be evidence of high moisture readings, dampness, mould. Adding Ventilation may help.
- There does appear to be evidence of high moisture readings or water ingress that requires further inspection.
Are Downlighters present?
- Yes
- No
Number of downlighter to cover?
Is attic boarded
- Yes
- No
- Partly
Notes
Survey Notes
Such as anything not straight forward, like finding the place, where to park, which walls to insulate or any comments by the home owner worth knowing. Difficult access points, awkward over hangs etc.
Square Meter Measurements
Total Area for Extraction
Total Suitable Area for Cavity Wall Insulation
Total Area for Loft Insulation
Quotation for Insulation works requiring work
Errors and Omissions Excepted (E&OE)
Total Cost of Cavity Extraction
Total Cost of Cavity Wall Insulation
Total Cost for Loft Insulation
The Survey
Name of Surveyor
- Jody Paice
- Matthew Owens
- Andrew Woodruff
Date of Survey
DD slash MM slash YYYY
Message to client
It was a pleasure to survey your proposed home purchase. I do hope you will find this useful.
Property Photos
ALL ELEVATIONS
Cavity Photos
We need photos of:
• 2 scope holes per each elevation showing cavity
• Photo of the scope in each hole.
• Photos of cavity depth
Photos Showing All Elevations Cavity, Depth & Scope
General Photos
DPC, Air Bricks, Fire Places, Log Burners, Boilers, External Flues, Extractor fans, Trickle Vents, Loft Gabel End, Plans or Damp
Photos of required remedial works
Loft Photos
Please upload all the below Loft photos:

Loft hatch, Existing depth, Down lights, tanks, vents, Photos of current loft insulation. Draft proofing. Tanks and pipe insulation.
All Loft Photos

Pre-purchase Survey

Customer Details

Type of Works

About The Building

About the Cavity

Areas Requiring Insulating

Loft Insulation

Notes

Square Meter Measurements

Quotation for Insulation works requiring work

The Survey

Property Photos

Cavity Photos

General Photos

Loft Photos